Acoustic Sound Board Transducer AST for Steel Stringed Acoustic Guitar Operation based on a worldwide patented elastic electret film, Large pickup surface 14mm x 70mm to capture all the detailed acoustics of the instrument, Size fits a wide range of guitars, Ultra thin, flexible and rugged constant structure, High gain before feedback, Wide dynamic range, Easy installation: the AST attaches to the guitar's bridge plate with a special two sided adhesive tape; string balance is always even, Easy plug in to the preamp, with o soldering, Compatible with all B Band onboard preamps.
Price:£41.99 Product Code: 1470

 |
|
 |
|
 |
|
Dual Channel Input UST and AST Only Preamp for Acoustic Guitar With XOM Circuit , remote soundhole volume and mix controls, UST and AST input gain trim, All plug inconnections, Hold tight battery clip, High quality output jack / Spec's: S / N ratio: > 90 dB, Distortion: 0.05 %, Frequency response: 50 Hz, 20 kHz, Low cut slope: 6 dB / oct @ both channels, Voltage gain AST and UST channels :+24 dB, Input Z AST and UST channels : 50 MOhms || < 10 pF Output impedance: 150 Ohms, Nominal output level: 10 dB ref. 775 mV RMS, Power supply: 9 volt battery not included , Current consumption: 1.5 mA typical, Connections: Transducer inputs, 2.54 mm header; Output, 1/4 inchjack, Weight with accessories : 45 g
Price:£84.99 Product Code: A2.2

 |
|
Sidemount, 1 Input Preamp for Acoustic Guitar, With 4 Band EQ and Notch Filter Accepts any B Band AST / UST, Bass, Middle, treble, presence and volume slider controls, Battery status LED, Pre wired Switchcraft® endpin jack including power on / off switch, All metal enclosure, Battery clip on back of preamp, Complete with all hardware for installation # Spec's: FrequencyResponse : 50 Hz to 20 KHz, Input gain: and 24dB, Bass: ±12dB @70 Hz, Mid: ± 12dB @400 Hz, Treble: ±12dB @2.5 KHz, Presence: ±12dB @12 KHz, Notch filter: 100 to 300 Hz / 15 dB, Q 3.3, Output level nominal : 10dB ref. 245 mV rms, Power supply: 9 V battery not included , Input Z: 50 MOhm, Output Z : 1 KOhm, Consumption: 4 mA, Weight with accessories :
Price:£106.99 Product Code: A5

 |
|
 |
|
 |
|
Condenser Microphone for Acoustic Intruments Combined to a B Band transducer UST or AST , allows all acoustic instrument's nuances to be reproduced, making the sound more alive, Optional with Core99 and 2150, Included in Entity front end, V.I.P.2 and New2 Frontier systems # Features: Ambient noise canceling sensitivity pattern, Low end roll off, Clamp and gooseneck provide easy position adjustment, Frequency response: 100 Hz to 10 kHz, sensitivity: 2.0 mV / Pa ± 4 dB @ 50 cm, 1 kHz, S / N ratio: > 58 dB, Supply voltage range: 1.5 to 10 V, Supply current: <= 0.5 mA
Price:£70.99 Product Code: AG-MIC

 |
|
Double Bass Transducer Set Including 3x Statement transducers 1 bass end, 1 high end and 1 under saddle , 1x built in endpin preamp attachable to two middle strings between bridge and tailpiece, 1x 9 V battery clip attachable to tailpiece with Velcro, Specifications: Frequency Response: 35 Hz 33 kHz, Low cut slope: 12 dB / oct., Voltage gain: 12 dB, Input impedance: 50 MOhm || < 10 pF, Output impedance Z: 1 KOhm, Power supply: 9 V battery not included , Current consumption: 0.8 mA
Price:£169.99 Product Code: D1

 |
|
 |
|
 |
|
Statement System for Double Bass including: 1x bass bridge w/ built-in 3 transducers(1 bass-end, 1 high-end and 1 under saddle) connected to a 3-pin XLRm output plug + 1x "Statement" amplification/ mixer unit featuring: Mix1(bridge signal) and Mix2(top signal) controls/ main volume/ footswitchable mute/ XLR input/Line output(6.3 mm phone jack )/ Mic output(balanced XLR)/ ground switch - Built-in high-pass filter to cut hum and ambient noise - Power supply: 9 Volts battery or 12 Vdc external AC/DC adaptor( both not included), or standard 48 Vdc(phantom).
Price:£394.99 Product Code: DB-STM-SYS

 |
|
DM5 Drum Mic Set Complete set of 5x rim mounted preamps including: 1x DM K for Bass Drum, 1x DM S for Snare Drum, 3x DM T for Tom / Floortom and 5x DST 2100 Electret Contact Transducers
Price:£689.99 Product Code: DM5-SET

 |
|
 |
|
|
Transducer and Preamp For Violin including: 1345 AST transducer connnected to 1/4" stereo input jack on chin-rest type mount w/ 1/4" mono output jack and active endpin preamp - Specifications: Freq. Response: 50 Hz – 33 kHz(-3dB) - Low-cut slope: -12 dB/oct. - Voltage gain: 24 dB - Input Z: 50 MOhm || < 10 pF - Output Z: 1 KOhm - Power supply: 9 V battery (not included) - Current consumption: 0.4 mA - Preamp Dim.(LxW): 90x13mm/3.5x5 in. - Weight (w/accessories): 57g & 9V battery supply box (BB-9 ) Dim.(LxWxH): 66x81x35 mm/ 2.6x3.2x1.4 in.
Price:£199.99 Product Code: S1

 |
|
 |
|
 |
|
Ribbed Under Saddle Transducer UST for Acoustic Guitar Width 22 mm / 3/32 Operation based on the exclusive B Band / Emfit electret film, UST has two sizes that will fit most guitars, AST will fit any instrument with clear access to the surface it is to be mounted on, Reproduces original tone without affecting the instrument acoustically, Ultra thin and lightweight, High gain before feedback, Wide dynamic range and frequency response, Easy, solder free installation, To be used with A1/ A2/ A3/ A4 ....B Band preamps.
Price:£31.99 Product Code: 22R Width 22 Mm / 3/32 Width 29 Mm / 1/8

 |
|
Ribbed Under Saddle Transducer UST for Acoustic Bass / Classical Guitar Width 29 mm / 1/8 Operation based on the exclusive B Band / Emfit electret film, UST has two sizes that will fit most guitars, AST will fit any instrument with clear access to the surface it is to be mounted on, Reproduces original tone without affecting the instrument acoustically, Ultra thin and lightweight, High gain before feedback, Wide dynamic range and frequency response, Easy, solder free installation, To be used with A1/ A2/ A3/ A4 ....B Band preamps.
Price:£42.58 Product Code: 29R

 |
|
 |
|
 |
|
Single Input End Pin Preamp for Acoustic Guitar The A1.2 is the little brother of the classic B Band A2 preamp and is big on classic B Band sound. The single input A1.2 has a direct frequency response with 24 dB of gain making a perfect fit with the B Band UST not included , The A1 kit provides all mounting hardware, battery clip and wire harness # Specifications: Frequency Response: 50 Hz to 23 kHz, Low cut slope: 12 dB / oct., Voltage gain: 21 dB, Input Z: 50 MOhm || < 10 pF, Output Z: 1 KOhm, Power supply: 9 V battery
Price:£72.99 Product Code: A1.2

 |
|