CONDENSER MIC.-ACOUSTIC GUITAR Combined to a B Band transducer UST or AST , allows all acoustic instrument's nuances to be reproduced, making the sound more alive, Optional with Core99 and 2150, Included in Entity front end, V.I.P.2 and New2 Frontier systems # Features: Ambient noise canceling sensitivity pattern, Low end roll off, Clamp and gooseneck provide easy position adjustment, Frequency response: 100 Hz to 10 kHz, sensitivity: 2.0 mV / Pa ± 4 dB @ 50 cm, 1 kHz, S / N ratio: > 58 dB, Supply voltage range: 1.5 to 10 V, Supply current: <= 0.5 mA
Price:£82.88 Product Code: AG-MIC

 | |  |
|
 | | ACOUS SOUNDBOARD TRANSDUC AST Operation based on a worldwide patented elastic electret film, Large pickup surface 14mm x 70mm to capture all the detailed acoustics of the instrument, Size fits a wide range of guitars, Ultra thin, flexible and rugged constant structure, High gain before feedback, Wide dynamic range, Easy installation: the AST attaches to the guitar's bridge plate with a special two sided adhesive tape; string balance is always even, Easy plug in to the preamp, with o soldering, Compatible with all B Band onboard preamps.
Price:£52.49 Product Code: 1470

 |
|
2 INPUT/1 OUTPUT PREAMP+XOM+V. , remote soundhole volume and mix controls, UST and AST input gain trim, All plug inconnections, Hold tight battery clip, High quality output jack / Spec's: S / N ratio: > 90 dB, Distortion: 0.05 %, Frequency response: 50 Hz, 20 kHz, Low cut slope: 6 dB / oct @ both channels, Voltage gain AST and UST channels :+24 dB, Input Z AST and UST channels : 50 MOhms || < 10 pF Output impedance: 150 Ohms, Nominal output level: 10 dB ref. 775 mV RMS, Power supply: 9 volt battery not included , Current consumption: 1.5 mA typical, Connections: Transducer inputs, 2.54 mm header; Output, 1/4 inchjack, Weight with accessories : 45 g
Price:£100.39 Product Code: A2.2

 | |  |
|
 | | 2.2MM UNDERSADDLE TRANSDUC.UST Operation based on the exclusive B Band / Emfit electret film, UST has two sizes that will fit most guitars, AST will fit any instrument with clear access to the surface it is to be mounted on, Reproduces original tone without affecting the instrument acoustically, Ultra thin and lightweight, High gain before feedback, Wide dynamic range and frequency response, Easy, solder free installation, To be used with A1/ A2/ A3/ A4 ....B Band preamps.
Price:£40.12 Product Code: 22R Width 22 Mm / 3/32 Width 29 Mm / 1/8

 |
|
BULK SINGLE INPUT ENDPIN PREAM The A1.2 is the little brother of the classic B Band A2 preamp and is big on classic B Band sound. The single input A1.2 has a direct frequency response with 24 dB of gain making a perfect fit with the B Band UST not included , The A1 kit provides all mounting hardware, battery clip and wire harness # Specifications: Frequency Response: 50 Hz to 23 kHz, Low cut slope: 12 dB / oct., Voltage gain: 21 dB, Input Z: 50 MOhm || < 10 pF, Output Z: 1 KOhm, Power supply: 9 V battery
Price:£86.04 Product Code: A1.2

 | |  |
|
 | | DUAL IN/OUTPUT ENDPIN PREAMP Ch1 for UST / AST, Ch2 for AST / sound hole condenser mic. / magnetic pickup, DIL switches: for treble enhancer at Ch 1 and 3 dB @ 6,3 KHz; and 5 dB @ 14 KHz ; for high pass filter at Ch 2 6 dB / oct @ 500 Hz ; for mic bias phantom voltage at Ch 2, High / low gain switch at Ch 2 # Spec's: FrequencyResponse : 50 Hz to 20 kHz, Low cut slope: 6 dB / oct, Ch 1 Gain V : and 18 dB, Ch 2 Gain V : and 24 dB, Ch 1 input Z: 50 MOhm ||< 10 pF, Ch 2 input Z: 20 MOhm 2.2 with mic phantom on , Output Z: 150 Ohm, Output level: 10 dB ref=775 mV RMS , Mic bias voltage: 9 V, Consumption: 1.5 mA 2 mA with mic , Weight with accessories : 49 g
Price:£100.39 Product Code: A2

 |
|
|
 | | 1 INPUT/OUTPUT SIDEMOUNT UK PR Fits at the side of almost any ukulele, rotary controls for volume and bass, low battery LED, supplied with remote output jack and battery holder.
Price:£84.17 Product Code: U 1.3T

 |
|
|
 | | A1 AC.GUIT.PREAMP+AST TRANSDUC Package also includes: 1 x strap attachment for preamp, 1 x cardboard installation guide for AST, cover tube for preamp, 1 x battery clip with adhesive, 1 x battery cord harness length: 65cm / 25 3/8 inch , 2 x wire clamps.
Price:£114.74 Product Code: A1.2N-1470

 |
|