Zoom B2 - USB Bass Effects Pedal
Product Code: ZFXB2.IU

Great bass amp sounds for any situation
Sophisticated bass amp modeling allows you to adjust parameters such as speaker cabinet characteristics and low-range response in three levels. Get the dynamic, high-impact bass sound of a large cabinet even with flat-response systems. This is handy when using headphones or studio monitors, or when playing through a small combo amp or other bass amp with low output power. Alternatively, turn the cabinet effect off and use only the characteristics of the amp head. Create your very own bass amp sound and get it whenever and wherever you want, even when using a series of different bass amplifiers on stage.

Two bass synthesizer types with different filtering and internal waveforms
The full-fledged bass synthesizer uses the built-in DSP sound source triggered by the input bass sound. Select from a choice of three waveform settings (sawtooth, square, PWM) and create sounds of incredible power and resonance. Two types of filtering with excellent tracking are also available, for playing melodious solo phrases.

13 different bass amp and stomp box modeling choices
By digitally simulating the clipping action of analog devices such as tubes and diodes, the unit faithfully duplicates the characteristics of tube amps and vintage effects. Going far deeper than the superficial "tone", this also includes elements such as depth and dynamics. Freely adjust the mix between drive sound and original sound to create deep distortion while your bass delivers a real punch.

47 high-quality effects implemented with 32-bit processing
Nine modules dedicated to aspects such as dynamics, drive, modulation, and ambience offer a total of 47 effects. Because the effects are optimized for the bass guitar range, you can freely create various sonic scenarios without impairing the bass foundation of the ensemble sound. A limiter/compressor lets you control peaks and ensure that levels are matched. The auto wah and resonance filter are indispensable for playing that funky sound. The octaver creates a wave of energy in the ultra-low range. The defret effect gives you the sweet tone and smooth transients of a fretless bass. Other features include delay with settings to 5000 ms and hold function, tape echo for that vintage feeling, crystal-clear stereo chorus, as well as flanger, phaser, pitch shifter and many other studio-class effects.

World's fastest patch change speed: 8 ms
The annoying slight muting interval of old when switching patches has been all but eliminated. With its record-setting speed of 0.008 seconds, the B2 series never misses a beat. For example, when changing from backing sound to a solo, you no longer need to press the switch slightly in advance. Simply push the foot switch and start playing the solo phrase. No more fear of losing the rhythm when making patch changes.

XLR output allows direct connection to PA mixer for stage work
Standard XLR connector lets you establish a balanced link, to ensure degradation-free, clean sound transmission also over long cable runs. There is no need to use a DI box, even when you want to directly hook the unit up to a mixing console or PA system. The pre/post switch makes it possible to get the effect sound from the main output and the direct sound (bypassing the A/D converter) from the XLR output.

Specifications
?Effect Types: 47 ?Effect Modules: 9 ?Maximum Simultaneous Effects: 9 ?Patch Memory: User 40+Preset 40, Total 80 ?Sampling Frequency: 96kHz ?A/D Conversion: 24bit, 64times over-sampling ?D/A Conversion: 24bit, 128times over-sampling ?Input: 1/4" phone jack(Rated input level: -20dBm, Input impedance: 1M?)?Output(Line / headphones combined): 1/4" stereo phone jack(Maximum output level: +5dBm, Output load impedance: 10k? or higher)?Balanced Output: XLR jack(Input/output gain: 0dB, Output impedance: 200?/HOT-COLD)?Control Input: Expression pedal, Foot switch ?USB interface: 16bit, 32kHz/44.1kHz/48kHz ?Display: 2digit 7segment LED display, Parameter LED, Pedal assign LED ?Power Requirements: AA size(LR6)battery x 4(Optional), or AC adaptor DC9V/300mA/ Center minus type(Optional, AD-0006 recommended)?Battery Life: 6hours(with alkaline batteries) ?Dimensions: 255(W) x 165(D) x 79(H)mm ?Weight: 1200g(without batteries)?Optional Accessories: FP02(Expression pedal), FS01(Foot switch), AD-0006(AC adaptor), AA size batteries * 0dBm=0.775Vrms

If you would like to know more about Zoom B2 - USB Bass Effects Pedal, please click on the MORE INFO button below and you can request the information that you need is added here by one of the PlayRecord.Net Customer Services Team.