TL Audio 5051 Mono Valve Processor
Product Code: 5051

Main Features • Preamp stage provides Input Gain, 48V, 90Hz filter and 30dB pad • Compressor section with control of: Threshold, Ratio, Gain Make-Up and Output Gain • Hard/soft knee compression modes • Four switchable Attack times from 'Fast' (0.5mS) through to 'Slow' (40mS) • Four switchable Release times from 'Fast' (40mS) through to 'Slow' (4S) • Optical gate with variable control of Threshold (from -10dB to 'off') • Switchable VU metering of input level, output level or gain reduction • Drive and Peak LEDs to indicate internal signal level • Front panel instrument input (for guitar, keyboard etc) • Balanced XLR mic input • LF EQ band gives ± 12dB shelving at 60Hz, 120Hz, 250Hz or 500Hz (12dB/octave) • LM EQ band gives ±12dB peaking at 250Hz, 500Hz, 1kHz or 2.2kHz (Q=0.5) • HM EQ band gives ±12dB peaking at 1.5kHz, 2.2kHz, 3.6kHz or 5kHz (Q=0.5) • HF EQ band gives ±12dB shelving at 2.2kHz, 5kHz, 8kHz or 12kHz (12dB/octave) • 'EQ Pre' switch allows the EQ section to be placed ahead of the compressor section • 'Link' switch allows two 5051s to be connected for stereo operation • Balanced XLR line input/output duplicated on unbalanced jack connectors • Sidechain insert point • Optional 24 bit digital output card (DO-2) Specifications Mic Input Noise (EIN): -127dBu (150 ohm source, 22Hz to 22kHz) Line Input (Balanced), maximum level: +26dBu Line Output (Balanced), maximum level: +26dBu Frequency Response: 10Hz to 40kHz, +0, -1dB Noise: -80dBu (22Hz to 22kHz) Dynamic Range: 106dB Power Supply consumption: 20VA typical Dimensions: 483 x 200 x 88mm (19", 2U) Weight: 6kg (The above specifications are subject to change without notice)

If you would like to know more about TL Audio 5051 Mono Valve Processor, please click on the MORE INFO button below and you can request the information that you need is added here by one of the PlayRecord.Net Customer Services Team.