TL Audio PA-2-Dual Pentode Valve Preamp
Product Code: pa2

Main Features • 2 channels of high quality valve pre-amplification • Balanced transformer coupled microphone inputs • Front panel unbalanced jack instrument inputs • Balanced line outputs, switchable for +4dB or +18dB operation • Line outputs duplicated on unbalanced jack connections • 48v phantom power • Switchable input gain control (20 to 50dB in 10dB steps) with continuously variable +/- 12dB trim • Switchable high and low pass filters (12dB / octave). Applies to all inputs • HPF has cut off frequencies of 50Hz, 100Hz or 150Hz • LPF has cut off frequencies of 5kHz, 10kHz or 15kHz • Rotary faders for controlling output level • Phase reverse switch on Channel B • Drive and Peak LEDs indicate internal signal levels • Circular back-lit VU meters monitor output level • Frequency response 30Hz to 40kHz +0 / -2dB Specifications Mic Input: Impedance: > 1.5k. Switchable input gain 20-50dB in 10dB steps, with + / - 12dB variable trim control. Input noise (EIN): -122dBu (22Hz to 22kHz). Distortion at 20dB of gain and 0dBu output: 0.05%. Max input level: +6dBu. Balanced XLR connector. Instrument Input: Impedance: 50k. Nominal sensitivity for 0dBu output: -35dBu. Unbalanced jack connector. Output: Balanced output impedance: < 10. Max level: +22dBu into 600. XLR connector. Unbalanced output impedance: 47. Max level: +20dBu into 10k. Jack connector. Frequency response: 30Hz to 40kHz +0 / -2dB. Power supply: 110-120v or 220-240v AC. Power consumption: 35VA typical. Dimensions: 483 x 205 x 88mm (19" 2U) Weight: 6 kg.

If you would like to know more about TL Audio PA-2-Dual Pentode Valve Preamp, please click on the MORE INFO button below and you can request the information that you need is added here by one of the PlayRecord.Net Customer Services Team.