|
|
|
 |
|
Jumbo Electro Acoustic Bass Cutaway and B Band EQ - Natural Satin
Top: Spruce, Back and Sides: Mahogany, Neck: Mahogany, 865 mm / 34 inch long scale, Bridge and Fingerboard: Rosewood, Soundhole: Pearloid inlays, Backstrip: Heringbone style, Machine Heads: Diecast Nickel, Electronics active : under saddle B Band tm pickup and B Band tm 3 Tone EQ with Volume and B / M/T ±12 dB and low battery test led
Price:£204.99
Product Code: SJB209BBNS
  |
|
6 String Woodland Series Electro Acoustic Guitar Cutaway With Solid Cedar Top and B Band 3.2 EQ Semigloss Lacquer Finish Natural In Triccase
Wild cherry body, Honduras mahogany neck , 24.84 scale, 1.75 inch width, tusq nut, 14 inch radius, Indian rosewood fingerboard with 21 frets, Rosewood bridge, Fully compensated tusq saddle, Inlayed wood rosette, Quarter sawn spruce bracing, Chrome machine heads, Electronics: UST strip pickup with side mount preamp featuring a 4 band EQ, a volume control and a low battery led indicator
Price:£598.99
Product Code: SP6CW CED GT G3
|
|
 |
|
|
Electro Acoustic Dreadnought Cutaway Guitar With 4 Band EQ Natural
Top: Basswood, Back and Sides: Basswood, Fingerboard and Bridge: Black stained Maple, Machine heads: Diecast, Black, Electronics active : under saddle pickup and sn 4 Volume and B / M/T+ Presence and phase switch and battery check , Outputs: 1 x 1/4 inch jack and 1 x XLR line
Price:£81.99
Product Code: SW203CE-N
|
|
|
|
|
Electro Acoustic Concert Cutaway Guitar With 4 Band EQ Natural
Top: Spruce, Back and Sides: Catalpa, Neck: Catalpa, Bridge and Fingerboard: Rosewood, Machine heads: Diecast nickel, Finish: highgloss, Electronics active : under saddle pickup and sn 4 EQ Volume and B / M/T / P and phase switch and phase switch and battery check , Outputs: 1 x standard 1/4 inch jack and 1 x XLR
Price:£80.99
Product Code: SW206CE-N
|
|
 |
|
 |
|
Deluxe Electro Acoustic Cutaway Concert Guitar With 4 Band EQ Natural
Top: Spruce, Back and Sides: Catalpa, Neck: Catalpa, Bridge and Fingerboard: Rosewood, Soundhole: Herringbone style inlay, Top purfling and Backstrip: Herringbone style, Binding Body / Neck / Headstock: Ivoroid Cream, Position Markers and Stagg logo: Abalone inlays, Machine heads: Diecast nickel, Finish: highgloss, Electronics active : under saddle pickup and 4 band HT N4 EQ: Volume and B / M with High / Low end switch / T and Presence and Feedback killer notch and battery check, Outputs: 1 x standard 1/4 inch jack and 1 x XLR
Price:£153.99
Product Code: SW306CE-N
|
|
Acoustic Sound Board Transducer AST for Steel Stringed Acoustic Guitar
Operation based on a worldwide patented elastic electret film, Large pickup surface 14mm x 70mm to capture all the detailed acoustics of the instrument, Size fits a wide range of guitars, Ultra thin, flexible and rugged constant structure, High gain before feedback, Wide dynamic range, Easy installation: the AST attaches to the guitar's bridge plate with a special two sided adhesive tape; string balance is always even, Easy plug in to the preamp, with o soldering, Compatible with all B Band onboard preamps.
Price:£40.99
Product Code: 1470
|
|
 |
|
 |
|
Dual Channel Input UST and AST Only Preamp for Acoustic Guitar With XOM Circuit
, remote soundhole volume and mix controls, UST and AST input gain trim, All plug inconnections, Hold tight battery clip, High quality output jack / Spec's: S / N ratio: > 90 dB, Distortion: 0.05 %, Frequency response: 50 Hz, 20 kHz, Low cut slope: 6 dB / oct @ both channels, Voltage gain AST and UST channels :+24 dB, Input Z AST and UST channels : 50 MOhms || < 10 pF Output impedance: 150 Ohms, Nominal output level: 10 dB ref. 775 mV RMS, Power supply: 9 volt battery not included , Current consumption: 1.5 mA typical, Connections: Transducer inputs, 2.54 mm header; Output, 1/4 inchjack, Weight with accessories : 45 g
Price:£79.99
Product Code: A2.2
|
|
