Acoustic Sound Board Transducer AST for Steel Stringed Acoustic Guitar
Operation based on a worldwide patented elastic electret film, Large pickup surface 14mm x 70mm to capture all the detailed acoustics of the instrument, Size fits a wide range of guitars, Ultra thin, flexible and rugged constant structure, High gain before feedback, Wide dynamic range, Easy installation: the AST attaches to the guitar's bridge plate with a special two sided adhesive tape; string balance is always even, Easy plug in to the preamp, with o soldering, Compatible with all B Band onboard preamps.
Price:£40.99
Product Code: 1470
  |
|
 |
|
 |
|
Dual Channel Input UST and AST Only Preamp for Acoustic Guitar With XOM Circuit
, remote soundhole volume and mix controls, UST and AST input gain trim, All plug inconnections, Hold tight battery clip, High quality output jack / Spec's: S / N ratio: > 90 dB, Distortion: 0.05 %, Frequency response: 50 Hz, 20 kHz, Low cut slope: 6 dB / oct @ both channels, Voltage gain AST and UST channels :+24 dB, Input Z AST and UST channels : 50 MOhms || < 10 pF Output impedance: 150 Ohms, Nominal output level: 10 dB ref. 775 mV RMS, Power supply: 9 volt battery not included , Current consumption: 1.5 mA typical, Connections: Transducer inputs, 2.54 mm header; Output, 1/4 inchjack, Weight with accessories : 45 g
Price:£79.99
Product Code: A2.2
|
|
Sidemount, 1 Input Preamp for Acoustic Guitar, With 4 Band EQ and Notch Filter
Accepts any B Band AST / UST, Bass, Middle, treble, presence and volume slider controls, Battery status LED, Pre wired Switchcraft® endpin jack including power on / off switch, All metal enclosure, Battery clip on back of preamp, Complete with all hardware for installation # Spec's: FrequencyResponse : 50 Hz to 20 KHz, Input gain: and 24dB, Bass: ±12dB @70 Hz, Mid: ± 12dB @400 Hz, Treble: ±12dB @2.5 KHz, Presence: ±12dB @12 KHz, Notch filter: 100 to 300 Hz / 15 dB, Q 3.3, Output level nominal : 10dB ref. 245 mV rms, Power supply: 9 V battery not included , Input Z: 50 MOhm, Output Z : 1 KOhm, Consumption: 4 mA, Weight with accessories :
Price:£118.99
Product Code: A5
|
|
 |
|
 |
|
Condenser Microphone for Acoustic Intruments
Combined to a B Band transducer UST or AST , allows all acoustic instrument's nuances to be reproduced, making the sound more alive, Optional with Core99 and 2150, Included in Entity front end, V.I.P.2 and New2 Frontier systems # Features: Ambient noise canceling sensitivity pattern, Low end roll off, Clamp and gooseneck provide easy position adjustment, Frequency response: 100 Hz to 10 kHz, sensitivity: 2.0 mV / Pa ± 4 dB @ 50 cm, 1 kHz, S / N ratio: > 58 dB, Supply voltage range: 1.5 to 10 V, Supply current: <= 0.5 mA
Price:£67.99
Product Code: AG-MIC
|
|
Ribbed Under Saddle Transducer UST for Acoustic Guitar Width 22 mm / 3/32
Operation based on the exclusive B Band / Emfit electret film, UST has two sizes that will fit most guitars, AST will fit any instrument with clear access to the surface it is to be mounted on, Reproduces original tone without affecting the instrument acoustically, Ultra thin and lightweight, High gain before feedback, Wide dynamic range and frequency response, Easy, solder free installation, To be used with A1/ A2/ A3/ A4 ....B Band preamps.
Price:£28.99
Product Code: 22R
|
|
 |
|
 |
|
Single Input End Pin Preamp for Acoustic Guitar
The A1.2 is the little brother of the classic B Band A2 preamp and is big on classic B Band sound. The single input A1.2 has a direct frequency response with 24 dB of gain making a perfect fit with the B Band UST not included , The A1 kit provides all mounting hardware, battery clip and wire harness # Specifications: Frequency Response: 50 Hz to 23 kHz, Low cut slope: 12 dB / oct., Voltage gain: 21 dB, Input Z: 50 MOhm || < 10 pF, Output Z: 1 KOhm, Power supply: 9 V battery
Price:£66.99
Product Code: A1.2
|
|
Sidemount, 2 Input Preamp for Acoustic Guitar, With 3 Band EQ and Notch Filter
Accepts any B Band AST / UST, Bass, Middle, Treble and Volume slider controls, Notch depth and frequency rotary controls, XOM circuit, Battery status LED, Pre wired high quality endpin jack including power on / off switch, All metal enclosure, Complete with all hardware for installation # Spec's: FrequencyResponse : 50 Hz to 40 KHz 3dB , Input gain: and 24dB, Bass: ±12dB @100 Hz, Mid: ± 11dB @ 1.1 kHz, Treble: ±12dB @ 12 KHz, Notch filter: 100 to 330 Hz / 15 dB, Q 3.3, Output level nominal : 10dB ref. O.245V rms, Power supply: 9V battery not included , Input Z: 50 MOhm, Output Z: <3.5 KOhm, Consumption: 4 mA
Price:£107.99
Product Code: A10
|
|
 |
|
 |
|
Sidemount, 1 Input Preamp for Acoustic Guitar, With 4 Band EQ and Notch Filter
Accepts any B Band AST / UST, Bass, Middle, treble, presence and volume controls, Battery status LED, Pre wired Switchcraft® endpin jack including power on / off switch, All metal enclosure, Battery clip on back of preamp, Complete with all hardware for installation # Spec's: FrequencyResponse : 50 Hz to 20 KHz, Input gain: and 24dB, Bass: ±12dB @70 Hz, Mid: ± 12dB @400 Hz, Treble: ±12dB @2.5 KHz, Presence: ±12dB @12 KHz, Notch filter: 100 to 300 Hz / 15 dB, Q 3.3, Output level nominal : 10dB ref. 245 mV rms, Power supply: 9 V battery not included , Input Z: 50 MOhm, Output Z : 1 KOhm, Consumption: 4 mA, Weight with accessories :
Price:£101.99
Product Code: A5T
|
|
Sidemount, Single Input Preamp With 4 Band Graphic EQ for Acoustic Guitar
Accepts any B Band AST / UST, Bass, Middle, treble, presence and volume slider controls, Battery status LED, Pre wired high quality endpin jack including power on / off switch, Battery clip on back of preamp, Complete with all hardware for installation # Spec's: S / N ratio: < 90 dB, Distortion: 0.05 %, FrequencyResponse : 50 Hz to 40 KHz, Input gain: and 24dB, Bass: ±12dB @ 70 Hz, Mid: ± 12dB @ 400 Hz, Treble: ±12dB @ 2.5 KHz, Presence: ±12dB @ 12 KHz, Output level nominal : 10dB ref. 0.245 V r.m.s, Power supply: 9 V battery not included , Input Z: 50 MOhm, Output Z: 150 Ohm, Consumption: 0.8 mA, Weight with accessories : 115 g
Price:£105.99
Product Code: A7
|
|
 |
|
 |
|
2 Channel UST and AST Sidemount XOM Preamp for Acoustic Guitar
And 3 band graphic slider EQ, Accepts any B Band AST / UST, Dual channel input UST and AST only , Bass, Middle, treble, XOM / UST mix and volume slider controls, Battery status LED, Pre wired Switchcraft® endpin jack including power on / off switch, Output Z: < 3.5 kohm, Nominal output level: 10 dB u 0.245 Vrms , UST / AST channel input Z: 50 Mohm, UST / AST channel voltage gain: 0 dB, and 24 dB, Bass: and / 12dB@100Hz, Mid: and / 11dB@1.1kHz, Treble: and / 12dB@12kHz, Frequency response: 50 Hz, 40 KHz 3 dB , Power supply: 9 V battery not included , Current consumption: 0.8 mA typical, Weight with accessories : 115 g
Price:£105.99
Product Code: A8
|
|
Sidemount, 1 Input Preamp for Acoustic Guitar, With 4 Band EQ and Notch Filter
Accepts any B Band UST, Bass, Middle, treble, presence and volume slider controls, Battery status LED, Pre wired high quality endpin jack including power on / off switch, All metal enclosure, Battery clip next to the controls, Complete with all hardware for installation # Spec's: FrequencyResponse : 50 Hz to 40 KHz, Input gain: and 24dB, Bass: ±12dB @70 Hz, Mid: ± 12dB @400 Hz, Treble: ±12dB @2.7 KHz, Presence: ±12dB @10 KHz, Notch filter: 100 to 330 Hz / 15 dB, Q 3.3, Output level nominal : 10dB ref. 245 mV rms, Power supply: 9 V battery not included , Input Z: 50 MOhm, Output Z: <3 KOhm, Consumption: 4 mA, Weight with accessories : 135 g
Price:£107.99
Product Code: A9
|
|
 |
|
 |
|
2 Channel End Pin Preamp for Acoustic Guitar
Ch1 for UST / AST, Ch2 for AST / sound hole condenser mic. / magnetic pickup, DIL switches: for treble enhancer at Ch 1 and 3 dB @ 6,3 KHz; and 5 dB @ 14 KHz ; for high pass filter at Ch 2 6 dB / oct @ 500 Hz ; for mic bias phantom voltage at Ch 2, High / low gain switch at Ch 2 # Spec's: FrequencyResponse : 50 Hz to 20 kHz, Low cut slope: 6 dB / oct, Ch 1 Gain V : and 18 dB, Ch 2 Gain V : and 24 dB, Ch 1 input Z: 50 MOhm ||< 10 pF, Ch 2 input Z: 20 MOhm 2.2 with mic phantom on , Output Z: 150 Ohm, Output level: 10 dB ref=775 mV RMS , Mic bias voltage: 9 V, Consumption: 1.5 mA 2 mA with mic , Weight with accessories : 49 g
Price:£92.99
Product Code: A2
|
|
