Kustom 16 Watt Acoustic Guitar Amp
Kustom 16 watt two channel acoustic guitar amplifier with 4 band active EQ separate input volumes and onboard spring reverb going through an 8 Celestion speaker.
Price:£99.99 £79.98
Product Code: KAA16
  |
|
 |
|
 |
|
Kustom 30 Watt Acoustic Guitar Amp
Kustom 30 watt two channel acoustic guitar amp with three band active EQ feedback controls onboard spring reverb and analogue chorus going through a 10 Celestion speaker.
Now Features Digital FX
Price:£189.99 £150.10
Product Code: KAA35DFX
|
|
Kustom 65 Watt Acoustic Guitar Amp
Kustom 65 watt two channel acoustic guitar amp with mic channel phase switching instrument feedback control separate EQ for mic and instrument and eight 24bit digital effects going through a 12 Celestion speaker.
Price:£259.99 £208.83
Product Code: KAA65
|
|
 |
|
 |
|
Dual Channel Input UST and AST Only Preamp for Acoustic Guitar With XOM Circuit
, remote soundhole volume and mix controls, UST and AST input gain trim, All plug inconnections, Hold tight battery clip, High quality output jack / Spec's: S / N ratio: > 90 dB, Distortion: 0.05 %, Frequency response: 50 Hz, 20 kHz, Low cut slope: 6 dB / oct @ both channels, Voltage gain AST and UST channels :+24 dB, Input Z AST and UST channels : 50 MOhms || < 10 pF Output impedance: 150 Ohms, Nominal output level: 10 dB ref. 775 mV RMS, Power supply: 9 volt battery not included , Current consumption: 1.5 mA typical, Connections: Transducer inputs, 2.54 mm header; Output, 1/4 inchjack, Weight with accessories : 45 g
Price:£79.99
Product Code: A2.2
|
|
Sidemount, 1 Input Preamp for Acoustic Guitar, With 4 Band EQ and Notch Filter
Accepts any B Band AST / UST, Bass, Middle, treble, presence and volume slider controls, Battery status LED, Pre wired Switchcraft® endpin jack including power on / off switch, All metal enclosure, Battery clip on back of preamp, Complete with all hardware for installation # Spec's: FrequencyResponse : 50 Hz to 20 KHz, Input gain: and 24dB, Bass: ±12dB @70 Hz, Mid: ± 12dB @400 Hz, Treble: ±12dB @2.5 KHz, Presence: ±12dB @12 KHz, Notch filter: 100 to 300 Hz / 15 dB, Q 3.3, Output level nominal : 10dB ref. 245 mV rms, Power supply: 9 V battery not included , Input Z: 50 MOhm, Output Z : 1 KOhm, Consumption: 4 mA, Weight with accessories :
Price:£118.99
Product Code: A5
|
|
 |
|
 |
|
20 W RMS Acoustic Guitar Amplifier With Spring Reverb
1 x 8 inch speaker, High impedance instrument Jack and microphone balanced XLR inputs with independent volume controls, 3 band EQ Bass / Middle / Treble and separate Parametric Mid control, Volume and Gain controls, Headphone input, Stereo jack input for CD / MP3 player
Price:£51.99
Product Code: 20 AA R UK
|
|
|
|
|
 |
|
Single Input End Pin Preamp for Acoustic Guitar
The A1.2 is the little brother of the classic B Band A2 preamp and is big on classic B Band sound. The single input A1.2 has a direct frequency response with 24 dB of gain making a perfect fit with the B Band UST not included , The A1 kit provides all mounting hardware, battery clip and wire harness # Specifications: Frequency Response: 50 Hz to 23 kHz, Low cut slope: 12 dB / oct., Voltage gain: 21 dB, Input Z: 50 MOhm || < 10 pF, Output Z: 1 KOhm, Power supply: 9 V battery
Price:£66.99
Product Code: A1.2
|
|
Sidemount, 2 Input Preamp for Acoustic Guitar, With 3 Band EQ and Notch Filter
Accepts any B Band AST / UST, Bass, Middle, Treble and Volume slider controls, Notch depth and frequency rotary controls, XOM circuit, Battery status LED, Pre wired high quality endpin jack including power on / off switch, All metal enclosure, Complete with all hardware for installation # Spec's: FrequencyResponse : 50 Hz to 40 KHz 3dB , Input gain: and 24dB, Bass: ±12dB @100 Hz, Mid: ± 11dB @ 1.1 kHz, Treble: ±12dB @ 12 KHz, Notch filter: 100 to 330 Hz / 15 dB, Q 3.3, Output level nominal : 10dB ref. O.245V rms, Power supply: 9V battery not included , Input Z: 50 MOhm, Output Z: <3.5 KOhm, Consumption: 4 mA
Price:£107.99
Product Code: A10
|
|
 |
|
 |
|
Sidemount, 1 Input Preamp for Acoustic Guitar, With 4 Band EQ and Notch Filter
Accepts any B Band AST / UST, Bass, Middle, treble, presence and volume controls, Battery status LED, Pre wired Switchcraft® endpin jack including power on / off switch, All metal enclosure, Battery clip on back of preamp, Complete with all hardware for installation # Spec's: FrequencyResponse : 50 Hz to 20 KHz, Input gain: and 24dB, Bass: ±12dB @70 Hz, Mid: ± 12dB @400 Hz, Treble: ±12dB @2.5 KHz, Presence: ±12dB @12 KHz, Notch filter: 100 to 300 Hz / 15 dB, Q 3.3, Output level nominal : 10dB ref. 245 mV rms, Power supply: 9 V battery not included , Input Z: 50 MOhm, Output Z : 1 KOhm, Consumption: 4 mA, Weight with accessories :
Price:£101.99
Product Code: A5T
|
|
