20 W RMS Guitar Amplifier 1 x 8 inch speaker, Metal front grille, High impedance instrument input, 3 band EQ Bass / Middle / Treble and separate parametric mid control, Volume and Gain controls, Overdrive switch for versatile distortion sounds, Headphone output, Stereo mini jack input for CD / MP3 player, Weight: 8.9 kg / 19.6 lbs
Price:£37.99 Product Code: 20 GA UK

 |
|
 |
|
 |
|
20 W RMS Guitar Amplifier With Spring Reverb 20 w rams guitar amplifier w/ spring reverb - 1x 8 sp(20.3cm)/ 4 ohms - high impedance input - overdrive switch - controls : gain/ volume/ normal/ reverb - equalization: bass/ medium/ treble
Price:£47.99 Product Code: 20 GA R UK

 |
|
Foldable Amplifier / Monitor Floor Stand Steel tubing construction, Base size WxD : 27 x 46 cm 10 5/8 x 18 inch , Main frame WxD : 30 x 30 cm 11 3/4 x 11 3/4 inch , Support frame WxD : 23 x 21 cm 9 x 8 1/4 inch , Size when folded: 64 x 30 x 4 cm / 25 1/4 x 8 1/4 x 1 9/16 inch , Load capacity: 40 kg 88 Lbs , Weight: 2,0 kg 4 3/8 Lbs
Price:£10.99 Product Code: GAS-3.2

 |
|
 |
|
 |
|
Short Amplifier / Monitor Floor Stand For professional speakers or music amplifiers, Steel tubing construction, Height adjustable by means of a clutch system, Braces 2x 30 cm = 11 3/4 inch W feature rest pads and legs 2x 50cm = 19 3/4 inch W are fitted with rubber feet, Tubing size: 30 x 15 mm / Ø25 mm 1 3/16'' x 19/32 inch with Ø 1 inch , Height / depth range: 16/ 34 to 28/ 23 cm 6 5/16 / 13 3/8 to 11 / 9 inch Load capacity: 40 kg 88 Lbs , Weight: 1,9 kg 4 1/4 Lbs
Price:£10.99 Product Code: GAS-4.2

 |
|
Adjustable Amplifier / Monitor Stand Steel tubing construction, Foldable legs with rubber feet, Height adjustable in 4 steps secured by a locking pin and a large screw, Tubing size: 35 x 20 mm / Ø25 mm 1 3/8 x 13/16 inch with 1''Ø , Support size W x D x H : 9 x 18 x 30 cm 3/8 x 3/4 x 1 3/16 inch , Base size W x D : 50 x 42 cm 19 3/4 x 16 1/2 inch , Height range: 38 to 48 cm 15 to 19 inch , Max. load capacity: 40 kg 88 Lbs , Weight: 3,9kg 8 5/8 Lbs
Price:£17.99 Product Code: GAS-5

 |
|
 |
|
 |
|
Dual Channel Input UST and AST Only Preamp for Acoustic Guitar With XOM Circuit , remote soundhole volume and mix controls, UST and AST input gain trim, All plug inconnections, Hold tight battery clip, High quality output jack / Spec's: S / N ratio: > 90 dB, Distortion: 0.05 %, Frequency response: 50 Hz, 20 kHz, Low cut slope: 6 dB / oct @ both channels, Voltage gain AST and UST channels :+24 dB, Input Z AST and UST channels : 50 MOhms || < 10 pF Output impedance: 150 Ohms, Nominal output level: 10 dB ref. 775 mV RMS, Power supply: 9 volt battery not included , Current consumption: 1.5 mA typical, Connections: Transducer inputs, 2.54 mm header; Output, 1/4 inchjack, Weight with accessories : 45 g
Price:£79.99 Product Code: A2.2

 |
|
Sidemount, 1 Input Preamp for Acoustic Guitar, With 4 Band EQ and Notch Filter Accepts any B Band AST / UST, Bass, Middle, treble, presence and volume slider controls, Battery status LED, Pre wired Switchcraft® endpin jack including power on / off switch, All metal enclosure, Battery clip on back of preamp, Complete with all hardware for installation # Spec's: FrequencyResponse : 50 Hz to 20 KHz, Input gain: and 24dB, Bass: ±12dB @70 Hz, Mid: ± 12dB @400 Hz, Treble: ±12dB @2.5 KHz, Presence: ±12dB @12 KHz, Notch filter: 100 to 300 Hz / 15 dB, Q 3.3, Output level nominal : 10dB ref. 245 mV rms, Power supply: 9 V battery not included , Input Z: 50 MOhm, Output Z : 1 KOhm, Consumption: 4 mA, Weight with accessories :
Price:£118.99 Product Code: A5

 |
|
 |
|
 |
|
Double Input, Rim Mounted Preamp for Snare Drum Weight With Accessories 88g/31oz Dim LxWxH104x36x47mm/409x14x18in held in place by an adjustable tension rod for ultra quick setup - Eliminates the need for audio gate effects - Can be left permanently installed - No modification required for mounting - Offers complete isolation, with no bleed from other drums # Specifications: Mini Switch control range: 1)Mic power +9V 2)External mic disable 3)Mid boost 330Hz + 6dB 4) +8dB boost @ 4Hz - Freq response: 60Hz - 35kHz (-3dB) - Inputs: B-Band XLR + AUX input for optional external mic enabling B-Band XOM (Cross-Over-Mix @ 2 kHz)- Output/Power: XLR balanced phantom powered 12-50V. Nominal output similar to standard dynamic drum mics - Can only operate W/ DST-2100 (not included)
Price:£124.99 Product Code: DM-S

 |
|
Drum Microphone Set (7pc) and 2Clamps/Case Selection of microphones 7 and mounts 2 designed for recording the drum set and packed in a lightweight and durable carrying case that includes: one DM 5010, Dynamic microphone for kick drum, four DM 5020, Dynamic microphone for tom and snare drum, two CM 5050, Electret condenser microphone for overhead recording, cymbals or hi hat micing and two break resistant swivel adaptors rotating 180° with universal 3/8 inch and 5/8 inch thread, ROHS Compliant.
Price:£145.99 Product Code: DMS-5700H

 |
|
 |
|
|
Quality Dynamic Microphone, Retro Design, Champagne Quality Dynamic Microphone Retro design for vocalists and musicians. More directional than the MD3000 and MD3000SC this makes it more suitable for vocal applications as it will 'catch' sound from a smaller area - helping to prevent feedback.
Price:£16.99 Product Code: MD-4000CHH

 |
|
 |
|
 |
|
Nylon Microphone Clamp ROHS compliant, Practically unbreakable, flexible, with 5/8 inch mounting brass thread and 5/8 inch out to 3/8 inch in thread adaptor, Colour: black, Suitable for straight and tapered microphones
Price:£1.99 Product Code: MH-12AH

 |
|