Electro Acoustic Dreadnought Cutaway Guitar With 4 Band EQ Natural
Top: Basswood, Back and Sides: Basswood, Fingerboard and Bridge: Black stained Maple, Machine heads: Diecast, Black, Electronics active : under saddle pickup and sn 4 Volume and B / M/T+ Presence and phase switch and battery check , Outputs: 1 x 1/4 inch jack and 1 x XLR line
Price:£81.99
Product Code: SW203CE-N
  |
|
|
|
|
Electro Acoustic Concert Cutaway Guitar With 4 Band EQ Natural
Top: Spruce, Back and Sides: Catalpa, Neck: Catalpa, Bridge and Fingerboard: Rosewood, Machine heads: Diecast nickel, Finish: highgloss, Electronics active : under saddle pickup and sn 4 EQ Volume and B / M/T / P and phase switch and phase switch and battery check , Outputs: 1 x standard 1/4 inch jack and 1 x XLR
Price:£80.99
Product Code: SW206CE-N
|
|
 |
|
 |
|
Deluxe Electro Acoustic Cutaway Concert Guitar With 4 Band EQ Natural
Top: Spruce, Back and Sides: Catalpa, Neck: Catalpa, Bridge and Fingerboard: Rosewood, Soundhole: Herringbone style inlay, Top purfling and Backstrip: Herringbone style, Binding Body / Neck / Headstock: Ivoroid Cream, Position Markers and Stagg logo: Abalone inlays, Machine heads: Diecast nickel, Finish: highgloss, Electronics active : under saddle pickup and 4 band HT N4 EQ: Volume and B / M with High / Low end switch / T and Presence and Feedback killer notch and battery check, Outputs: 1 x standard 1/4 inch jack and 1 x XLR
Price:£153.99
Product Code: SW306CE-N
|
|
Acoustic Sound Board Transducer AST for Steel Stringed Acoustic Guitar
Operation based on a worldwide patented elastic electret film, Large pickup surface 14mm x 70mm to capture all the detailed acoustics of the instrument, Size fits a wide range of guitars, Ultra thin, flexible and rugged constant structure, High gain before feedback, Wide dynamic range, Easy installation: the AST attaches to the guitar's bridge plate with a special two sided adhesive tape; string balance is always even, Easy plug in to the preamp, with o soldering, Compatible with all B Band onboard preamps.
Price:£40.99
Product Code: 1470
|
|
 |
|
 |
|
Dual Channel Input UST and AST Only Preamp for Acoustic Guitar With XOM Circuit
, remote soundhole volume and mix controls, UST and AST input gain trim, All plug inconnections, Hold tight battery clip, High quality output jack / Spec's: S / N ratio: > 90 dB, Distortion: 0.05 %, Frequency response: 50 Hz, 20 kHz, Low cut slope: 6 dB / oct @ both channels, Voltage gain AST and UST channels :+24 dB, Input Z AST and UST channels : 50 MOhms || < 10 pF Output impedance: 150 Ohms, Nominal output level: 10 dB ref. 775 mV RMS, Power supply: 9 volt battery not included , Current consumption: 1.5 mA typical, Connections: Transducer inputs, 2.54 mm header; Output, 1/4 inchjack, Weight with accessories : 45 g
Price:£79.99
Product Code: A2.2
|
|
Sidemount, 1 Input Preamp for Acoustic Guitar, With 4 Band EQ and Notch Filter
Accepts any B Band AST / UST, Bass, Middle, treble, presence and volume slider controls, Battery status LED, Pre wired Switchcraft® endpin jack including power on / off switch, All metal enclosure, Battery clip on back of preamp, Complete with all hardware for installation # Spec's: FrequencyResponse : 50 Hz to 20 KHz, Input gain: and 24dB, Bass: ±12dB @70 Hz, Mid: ± 12dB @400 Hz, Treble: ±12dB @2.5 KHz, Presence: ±12dB @12 KHz, Notch filter: 100 to 300 Hz / 15 dB, Q 3.3, Output level nominal : 10dB ref. 245 mV rms, Power supply: 9 V battery not included , Input Z: 50 MOhm, Output Z : 1 KOhm, Consumption: 4 mA, Weight with accessories :
Price:£118.99
Product Code: A5
|
|
 |
|
 |
|
Condenser Microphone for Acoustic Intruments
Combined to a B Band transducer UST or AST , allows all acoustic instrument's nuances to be reproduced, making the sound more alive, Optional with Core99 and 2150, Included in Entity front end, V.I.P.2 and New2 Frontier systems # Features: Ambient noise canceling sensitivity pattern, Low end roll off, Clamp and gooseneck provide easy position adjustment, Frequency response: 100 Hz to 10 kHz, sensitivity: 2.0 mV / Pa ± 4 dB @ 50 cm, 1 kHz, S / N ratio: > 58 dB, Supply voltage range: 1.5 to 10 V, Supply current: <= 0.5 mA
Price:£67.99
Product Code: AG-MIC
|
|
Double Bass Transducer Set
Including 3x Statement transducers 1 bass end, 1 high end and 1 under saddle , 1x built in endpin preamp attachable to two middle strings between bridge and tailpiece, 1x 9 V battery clip attachable to tailpiece with Velcro, Specifications: Frequency Response: 35 Hz 33 kHz, Low cut slope: 12 dB / oct., Voltage gain: 12 dB, Input impedance: 50 MOhm || < 10 pF, Output impedance Z: 1 KOhm, Power supply: 9 V battery not included , Current consumption: 0.8 mA
Price:£169.99
Product Code: D1
|
|
 |
|
 |
|
Statement System for Double Bass
including: 1x bass bridge w/ built-in 3 transducers(1 bass-end, 1 high-end and 1 under saddle) connected to a 3-pin XLRm output plug + 1x "Statement" amplification/ mixer unit featuring: Mix1(bridge signal) and Mix2(top signal) controls/ main volume/ footswitchable mute/ XLR input/Line output(6.3 mm phone jack )/ Mic output(balanced XLR)/ ground switch - Built-in high-pass filter to cut hum and ambient noise - Power supply: 9 Volts battery or 12 Vdc external AC/DC adaptor( both not included), or standard 48 Vdc(phantom).
Price:£264.99
Product Code: DB-STM-SYS
|
|
DM5 Drum Mic Set
Complete set of 5x rim mounted preamps including: 1x DM K for Bass Drum, 1x DM S for Snare Drum, 3x DM T for Tom / Floortom and 5x DST 2100 Electret Contact Transducers
Price:£619.99 £639.99
Product Code: DM5-SET
|
|
 |
|
 |
|
Double Input, Rim Mounted Preamp for Snare Drum Weight With Accessories 88g/31oz Dim LxWxH104x36x47mm/409x14x18in
held in place by an adjustable tension rod for ultra quick setup - Eliminates the need for audio gate effects - Can be left permanently installed - No modification required for mounting - Offers complete isolation, with no bleed from other drums # Specifications: Mini Switch control range: 1)Mic power +9V 2)External mic disable 3)Mid boost 330Hz + 6dB 4) +8dB boost @ 4Hz - Freq response: 60Hz - 35kHz (-3dB) - Inputs: B-Band XLR + AUX input for optional external mic enabling B-Band XOM (Cross-Over-Mix @ 2 kHz)- Output/Power: XLR balanced phantom powered 12-50V. Nominal output similar to standard dynamic drum mics - Can only operate W/ DST-2100 (not included)
Price:£124.99
Product Code: DM-S
|
|
