Professional PGT 80 Studio Condenser Microphone Set With Accessories
Large size carrying case including:1x Pressure Gradient Microphone PGT 80 in Silver Bronze Matt finish with dual 1 inch gold plate diaphragm, multi polar pattern Uni / Bi / Omnidirectional , switchable 10 dB attenuation pad and switchable low cut filter 12dB / oct @ 100 Hz , and 1x 48 Vdc Phantom Power Supply Unit PCO S with AC cable, 1x balanced and shielded 10 meter audio cable, 1x foam windscreen WS S49 and 1x shock proof mount suspension, Optional accessories: MCO Popscreen MC 06 xx or 10xx 6 or 10 metre balanced XLR mic.cable Size LxDxH :16x13x6.5 in / 40.5x33x16.5 cm
Price:£200.99
Product Code: PGT-80 SETH
  |
|
 |
|
 |
|
Popscreen for Studio Condenser Microphones I.e MCO Series
Pop screen for studio-condenser microphones provides excellent suppression of pop noise's and unwanted hiss. Round plastic frame covered with black gauze on both sides mounted on a single metal shaft with a quick-release clamp for easy on-stand mounting.
Price:£17.99
Product Code: PMCOH
|
|
|
|
|
|
|
|
Dual 48 Vdc Phantom Power Supply Unit for Studio Condenser Microphones
Rugged black metal box equiped with 1 mains on / off switch, fuse 0.5A , control led and 1 mains selector switch 115Vac~230Vac , 2 balanced 3 pin XLRF inputs for 2 MCO series mic. and 2 balanced 3 pin XLRM outputs to the mixer, WxHxD / mm : 127x63x152, Net weight: 990g, Including mains power cable.
Price:£44.99
Product Code: PCO-2AL-UKH
|
|
 |
|
 |
|
Dual 48 Vdc Phantom Power Supply Unit for Studio Condenser Microphones
Rugged black metal box equiped with 1 mains on / off switch, fuse 0.5A , control led and 1 mains selector switch 115Vac~230Vac , 2 balanced 3 pin XLRF inputs for 2 MCO series mic. and 2 balanced 3 pin XLRM outputs to the mixer, WxHxD / mm : 127x63x152, Net weight: 990g, Including mains power cable
Price:£44.99
Product Code: PCO-2ALH
|
|
Professional, Multi Pattern, Studio Condenser Microphone
With dual 1 inch gold plate diaphragm, pressure gradient transducer, multi polar pattern Uni / Bi / Omnidirectional ,10 dB attenuation pad and low cut filter switch 12dB / oct #Incl.:Shock mounted cartridge / Rugged metal housing / IntegrMesh grille / Built in 3 pin XLRm connector / Swivel mount clamp / ABS case#Freq.Resp=20Hz to 20kHz / Z out=200 Ohms balanced / Z load=1k Ohm Rated / Sensitivity: 31dB / 33dB / 34dB 1V / Pa @1kHz / Max.SPL=135dB,1% THD @1kHz / Equiv.Noise Level=14/15/16dB A Weighted S / N Ratio> 80/79/78dB Ref 1Pa / Power Supply=48 Vdc phantom #Access. optional : PCO S 48V PSU / WS S49 Foam Windscreen / MCO Popscreen / Cable#Size D*H : 54x155 mm / 2.1x6.1 in.
Price:£115.99
Product Code: PGT-80H
|
|
 |
|
