Dual Channel Input UST and AST Only Preamp for Acoustic Guitar With XOM Circuit
, remote soundhole volume and mix controls, UST and AST input gain trim, All plug inconnections, Hold tight battery clip, High quality output jack / Spec's: S / N ratio: > 90 dB, Distortion: 0.05 %, Frequency response: 50 Hz, 20 kHz, Low cut slope: 6 dB / oct @ both channels, Voltage gain AST and UST channels :+24 dB, Input Z AST and UST channels : 50 MOhms || < 10 pF Output impedance: 150 Ohms, Nominal output level: 10 dB ref. 775 mV RMS, Power supply: 9 volt battery not included , Current consumption: 1.5 mA typical, Connections: Transducer inputs, 2.54 mm header; Output, 1/4 inchjack, Weight with accessories : 45 g
Price:£79.99
Product Code: A2.2
  |
|
 |
|
 |
|
Sidemount, 1 Input Preamp for Acoustic Guitar, With 4 Band EQ and Notch Filter
Accepts any B Band AST / UST, Bass, Middle, treble, presence and volume slider controls, Battery status LED, Pre wired Switchcraft® endpin jack including power on / off switch, All metal enclosure, Battery clip on back of preamp, Complete with all hardware for installation # Spec's: FrequencyResponse : 50 Hz to 20 KHz, Input gain: and 24dB, Bass: ±12dB @70 Hz, Mid: ± 12dB @400 Hz, Treble: ±12dB @2.5 KHz, Presence: ±12dB @12 KHz, Notch filter: 100 to 300 Hz / 15 dB, Q 3.3, Output level nominal : 10dB ref. 245 mV rms, Power supply: 9 V battery not included , Input Z: 50 MOhm, Output Z : 1 KOhm, Consumption: 4 mA, Weight with accessories :
Price:£118.99
Product Code: A5
|
|
Single Input End Pin Preamp for Acoustic Guitar
The A1.2 is the little brother of the classic B Band A2 preamp and is big on classic B Band sound. The single input A1.2 has a direct frequency response with 24 dB of gain making a perfect fit with the B Band UST not included , The A1 kit provides all mounting hardware, battery clip and wire harness # Specifications: Frequency Response: 50 Hz to 23 kHz, Low cut slope: 12 dB / oct., Voltage gain: 21 dB, Input Z: 50 MOhm || < 10 pF, Output Z: 1 KOhm, Power supply: 9 V battery
Price:£66.99
Product Code: A1.2
|
|
 |
|
 |
|
Sidemount, 2 Input Preamp for Acoustic Guitar, With 3 Band EQ and Notch Filter
Accepts any B Band AST / UST, Bass, Middle, Treble and Volume slider controls, Notch depth and frequency rotary controls, XOM circuit, Battery status LED, Pre wired high quality endpin jack including power on / off switch, All metal enclosure, Complete with all hardware for installation # Spec's: FrequencyResponse : 50 Hz to 40 KHz 3dB , Input gain: and 24dB, Bass: ±12dB @100 Hz, Mid: ± 11dB @ 1.1 kHz, Treble: ±12dB @ 12 KHz, Notch filter: 100 to 330 Hz / 15 dB, Q 3.3, Output level nominal : 10dB ref. O.245V rms, Power supply: 9V battery not included , Input Z: 50 MOhm, Output Z: <3.5 KOhm, Consumption: 4 mA
Price:£107.99
Product Code: A10
|
|
Sidemount, 1 Input Preamp for Acoustic Guitar, With 4 Band EQ and Notch Filter
Accepts any B Band AST / UST, Bass, Middle, treble, presence and volume controls, Battery status LED, Pre wired Switchcraft® endpin jack including power on / off switch, All metal enclosure, Battery clip on back of preamp, Complete with all hardware for installation # Spec's: FrequencyResponse : 50 Hz to 20 KHz, Input gain: and 24dB, Bass: ±12dB @70 Hz, Mid: ± 12dB @400 Hz, Treble: ±12dB @2.5 KHz, Presence: ±12dB @12 KHz, Notch filter: 100 to 300 Hz / 15 dB, Q 3.3, Output level nominal : 10dB ref. 245 mV rms, Power supply: 9 V battery not included , Input Z: 50 MOhm, Output Z : 1 KOhm, Consumption: 4 mA, Weight with accessories :
Price:£101.99
Product Code: A5T
|
|
 |
|
 |
|
Sidemount, Single Input Preamp With 4 Band Graphic EQ for Acoustic Guitar
Accepts any B Band AST / UST, Bass, Middle, treble, presence and volume slider controls, Battery status LED, Pre wired high quality endpin jack including power on / off switch, Battery clip on back of preamp, Complete with all hardware for installation # Spec's: S / N ratio: < 90 dB, Distortion: 0.05 %, FrequencyResponse : 50 Hz to 40 KHz, Input gain: and 24dB, Bass: ±12dB @ 70 Hz, Mid: ± 12dB @ 400 Hz, Treble: ±12dB @ 2.5 KHz, Presence: ±12dB @ 12 KHz, Output level nominal : 10dB ref. 0.245 V r.m.s, Power supply: 9 V battery not included , Input Z: 50 MOhm, Output Z: 150 Ohm, Consumption: 0.8 mA, Weight with accessories : 115 g
Price:£105.99
Product Code: A7
|
|
2 Channel UST and AST Sidemount XOM Preamp for Acoustic Guitar
And 3 band graphic slider EQ, Accepts any B Band AST / UST, Dual channel input UST and AST only , Bass, Middle, treble, XOM / UST mix and volume slider controls, Battery status LED, Pre wired Switchcraft® endpin jack including power on / off switch, Output Z: < 3.5 kohm, Nominal output level: 10 dB u 0.245 Vrms , UST / AST channel input Z: 50 Mohm, UST / AST channel voltage gain: 0 dB, and 24 dB, Bass: and / 12dB@100Hz, Mid: and / 11dB@1.1kHz, Treble: and / 12dB@12kHz, Frequency response: 50 Hz, 40 KHz 3 dB , Power supply: 9 V battery not included , Current consumption: 0.8 mA typical, Weight with accessories : 115 g
Price:£105.99
Product Code: A8
|
|
 |
|
 |
|
Sidemount, 1 Input Preamp for Acoustic Guitar, With 4 Band EQ and Notch Filter
Accepts any B Band UST, Bass, Middle, treble, presence and volume slider controls, Battery status LED, Pre wired high quality endpin jack including power on / off switch, All metal enclosure, Battery clip next to the controls, Complete with all hardware for installation # Spec's: FrequencyResponse : 50 Hz to 40 KHz, Input gain: and 24dB, Bass: ±12dB @70 Hz, Mid: ± 12dB @400 Hz, Treble: ±12dB @2.7 KHz, Presence: ±12dB @10 KHz, Notch filter: 100 to 330 Hz / 15 dB, Q 3.3, Output level nominal : 10dB ref. 245 mV rms, Power supply: 9 V battery not included , Input Z: 50 MOhm, Output Z: <3 KOhm, Consumption: 4 mA, Weight with accessories : 135 g
Price:£107.99
Product Code: A9
|
|
2 Channel End Pin Preamp for Acoustic Guitar
Ch1 for UST / AST, Ch2 for AST / sound hole condenser mic. / magnetic pickup, DIL switches: for treble enhancer at Ch 1 and 3 dB @ 6,3 KHz; and 5 dB @ 14 KHz ; for high pass filter at Ch 2 6 dB / oct @ 500 Hz ; for mic bias phantom voltage at Ch 2, High / low gain switch at Ch 2 # Spec's: FrequencyResponse : 50 Hz to 20 kHz, Low cut slope: 6 dB / oct, Ch 1 Gain V : and 18 dB, Ch 2 Gain V : and 24 dB, Ch 1 input Z: 50 MOhm ||< 10 pF, Ch 2 input Z: 20 MOhm 2.2 with mic phantom on , Output Z: 150 Ohm, Output level: 10 dB ref=775 mV RMS , Mic bias voltage: 9 V, Consumption: 1.5 mA 2 mA with mic , Weight with accessories : 49 g
Price:£92.99
Product Code: A2
|
|
 |
|
 |
|
Sidemount, Single Input Preamp With 3 Band EQ for Acoustic Guitar
Accepts any B Band AST / UST, Bass, Middle, treble and volume controls, Battery status LED, Pre wired Switchcraft® endpin jack including power on / off switch, All metal enclosure, Battery clip on back of preamp, Complete with all hardware for installation # Spec's: Bass range: ±11.6 dB @ 70 Hz, Mid range: ± 11.3 dB @ 1.1 KHz, Treb range: ± 11.3 dB @ 10 KHz, FrequencyResponse : 50 Hz to 20 KHz, Output level nominal : 10 dB ref. 775 mV r.m.s, Power supply: 9 V battery not included , Input Z: 50 MOhm, Output Z : 150 Ohm, Gain: and 21 dB, Consumption: 0.8 mA
Price:£88.99
Product Code: A3
|
|
