Seymour Duncan Hot Lead Stack®
By stacking two coils with extra windings around a bar magnet the output is boosted without altering the pure single coil sound.
Price:£79.99
Product Code: STK-T2B
  |
|
 |
|
 |
|
Seymour Duncan Vintage Lead Stack®
Designed with the needs of professional pickers in mind this pickup imparts all of the classic twang of a vintage Tele® with one very important distinction ¤ no 60 cycle hum and virtually no noise. Click the pic for more info
Price:£79.99
Product Code: STK-T3B
|
|
Seymour Duncan Vintage 54™
Fender® made some changes in the Telecaster® lead pickup. Smaller diameter magnets were used and the centre pole pieces extended closer to the strings. The result was a strong clear response to high notes -- a bright and biting sound.
Price:£64.99
Product Code: STL-1
|
|
 |
|
 |
|
Seymour Duncan Vintage for Broadcaster®
The first Telecaster® pickup (1948) had an unprecedented edgy sound and great sustain. Leo Fender called it the Broadcaster® and we make one exactly like it. The STL-1b duplicates this fat most sought-after vintage sound.
Price:£64.99
Product Code: STL-1B
|
|
Seymour Duncan Quarter-Pound™ - For Tel
This single coil pickup has enough power to compete with humbuckers. The stronger magnetic field of the quarter-inch wide pole pieces increases the output and allows use of a special coil winding.
Price:£64.99
Product Code: STL-3-1
|
|
 |
|
 |
|
Seymour Duncan Five-Two™ - Nashville Studio For Tel
Here's how the Five-Two concept works: Seymour utilizes sand cast alnico 5 magnets on the three low strings. This adds more definition and punch to the bottom end. Seymour uses sand cast alnico 2 magnets on the three high strings... click the pic for more
Price:£90.99
Product Code: STLSTR52-1-1
|
|
Seymour Duncan Vintage Rails™ - Bridg
Vintage Rails use a unique split rail twin coil design and special wiring to achieve true single coil tone without any hum. The sound is clean clear and bright with all that quack you love in the notch positions.
Price:£85.95
Product Code: SVR-1-1
|
|
 |
|
|
|
Seymour Duncan Vintage Rails™ - Neck/Middl
Vintage Rails use a unique split rail twin coil design and special wiring to achieve true single coil tone without any hum. The sound is clean clear and bright with all that quack you love in the notch positions.
Price:£85.95
Product Code: SVR-1-4
|
|
Seymour Duncan Hot Rails for tele™
This lead position pickup is a direct replacement humbucker. It delivers a fat full sound. The two thin blades with powerful coil windings combine to give you a raw distorted rock 'n' roll tone with incredible sustain.
Price:£79.95
Product Code: 11205-03
|
|
 |
|
