|
 |
|
Dual Channel Input UST and AST Only Preamp for Acoustic Guitar With XOM Circuit , remote soundhole volume and mix controls, UST and AST input gain trim, All plug inconnections, Hold tight battery clip, High quality output jack / Spec's: S / N ratio: > 90 dB, Distortion: 0.05 %, Frequency response: 50 Hz, 20 kHz, Low cut slope: 6 dB / oct @ both channels, Voltage gain AST and UST channels :+24 dB, Input Z AST and UST channels : 50 MOhms || < 10 pF Output impedance: 150 Ohms, Nominal output level: 10 dB ref. 775 mV RMS, Power supply: 9 volt battery not included , Current consumption: 1.5 mA typical, Connections: Transducer inputs, 2.54 mm header; Output, 1/4 inchjack, Weight with accessories : 45 g
Price:£79.99 Product Code: A2.2

 |
|
|
 |
|
Seymour Duncan 59™ Built specifically for the bridge pickup position with no logo. This pickup will instantly add warm smooth tone and sustain unlike anything heard before.
Price:£79.99 Product Code: SH-1B

 |
|
Seymour Duncan Hot Lead Stack® By stacking two coils with extra windings around a bar magnet the output is boosted without altering the pure single coil sound.
Price:£79.99 Product Code: STK-T2B

 |
|
 |
|
 |
|
Seymour Duncan Vintage Lead Stack® Designed with the needs of professional pickers in mind this pickup imparts all of the classic twang of a vintage Tele® with one very important distinction ¤ no 60 cycle hum and virtually no noise. Click the pic for more info
Price:£79.99 Product Code: STK-T3B

 |
|
|
 |
|
Sidemount, Single Input Preamp With 4 Band Graphic EQ and Chromatic Tuner Fully chromatic tuner with wide range and fast response, Accepts any B Band AST / UST, Bass, Middle, treble, presence and volume rotary controls, Battery status LED, Pre wired high quality endpin output jack including power on / off switch, All metal enclosure, Battery clip on back of preamp # Spec's: S / N ratio: < 90 dB, Distortion: 0.05 %, FrequencyResponse : 50 Hz to 23 KHz, Input gain: and 24dB, Bass: ±12dB @ 70 Hz, Mid: ± 12dB @ 400 Hz, Treble: ±12dB @ 2.5 KHz, Presence: ±12dB @ 12 KHz, Output level nominal : 10dB ref. 775 mV r.m.s, Power supply: 9 V battery not included , Input Z: 50 MOhm, Output Z : 150 Ohm, Consumption: 0.8 mA, Weight with accessories
Price:£80.99 Product Code: A3T

 |
|
|
 |
|
Seymour Duncan Jerry Donahue Model™ When Jerry needed a touring guitar with the exact same sound as his prized '52 he turned to Seymour who accurately duplicated the warm punchy tone of its bridge pickup. Seymour used Alnico II rod magnets and a special wind for increased sustain. Click t
Price:£82.99 Product Code: APTL-3JD

 |
|
|
|