CD-BT1 MKII Portable CD Bass Trainer
Product Code: CD-BT1MKII

Tascam CDBT1 MKII Main Features:

• Easy-to-use interface
• VSA (Variable Speed Audition: pitch control without affecting key): +16, +12, +8, +4, 0, -4, -8, -16, -32, -50%
• Key Control: ±6 semi-tone, in semi-tone steps with ±50 cents fine tune
• VSA and Key Control can be used at the same time
• +16 to -50% Pitch Control in 1% steps (when VSA off)
• Bass Enhancement Effect (Bass Cut, Bass Boost, Bass Enhanced)
• MONO Monitor for CD (L+R, L, R)
• Split Monitor (Left ch: CD, Right ch: Input or vice versa)
• Single Loop, All Loop, and Seamless IN-OUT Loop
• CUE point memory
• Flash Start with CUE: Seamless locate and play from the CUE point
• Single Play and Continuous Play
• 10-seconds anti-shock memory
• Metronome (BPM: 40 to 220, Beat: 2 to 6)
• Active/passive bass input
• 16 built-in Bass Effects
• 5-setting Effect Memory
• 5-band Graphic EQ for Bass with Mid Shape
• 2-setting EQ memory
• Foot Switch connector for CUE, Flash Start, EQ Slot Select, Effect Slot Select (next or previous), FFWD, or REW
• Input Volume for BASS IN
• Output Volume for PHONES and LINE OUT
• Chromatic Tuner with calibration (435 to 445Hz) and OSC
• Stereo mini jack line input
• Battery included, optional power supply available

Tascam CDBT1 MKII Specifications:

• CD Player characteristics
• Disc types 8-cm single, 12-cm CD
• A/D, D/A 16-bit
• Frequency response 20Hz to 20kHz, ±1.0dB
• Dynamic range >88 dB
• S/N ratio >88 dB
• THD <0.01%
• Digital signal processing 32-bit
• Analogue inputs and outputs
• Nominal output level (LINE OUT) –10dBV
• Maximum output level (LINE OUT) without distortion 0dBV (1Vrms)
• Output impedance 1kOhm
• Maximum output power (PHONES) >18mW (into 32Ohm)
• Nominal input levels
• LINE IN –10dBV
• BASS IN –15dBV (passive)
  –10dBV (active)
• Power consumption 4 W (PS-PS5 AC adapter)
• Dimensions (W x D x H) including feet 232mm x 138mm x 40mm
• Weight (excluding batteries) 0,62kg